FRP / GRP Moulded Gratings

frp grating
frp grating
frp grating

frp grating

We are leading manufacturer of FRP Gratings. FRP / GRP Moulded grating is a new type composite material, which is produced from glass fiber as framework and reinforced resins, including unsaturated polyester, epoxy resin and phenolic resin.
Strong, lightweight, extremely excellent corrosion and rust resistance are best representative of FRP/GRP grating.
Nowadays, the FRP/GRP grating gradually replace the steel gratings in commercial and industrial plants as its outstanding chemical and mechanical advantages.
FRP / GRP Moulded grating is ideal for highly corrosive applications where larger open area gratings are required. Molded Grating is ideal for applications requiring extensive cut outs for pipe, duct and electrical penetrations.


Technical Specifications for FRP Moulded Gratings and Accessories :
  • Raw material of the FRP Grating -
    i) Glass Fibre (Content 25% - 30%) of approved quality and
    ii) Unsaturated Polyester Resin.
  • Thickness of Grating shall be minimum 25 mm.
  • Mesh Size (outside to outside) of Grating shall be maximum 40 mm X 40 mm.
  • Rib Thickness shall be 5mm - 7mm.
  • Maximum deflection shall be 6 mm for minimum Support span of 1 Mtr. with minimum load carrying capacity 300 kg/sqm.
  • Standard Surface Finish shall be 'Meniscus' top type.
  • Standard panel shall have minimum width of 400 mm. Curtailment is allowed for wider panel sizes however, ribs shall be present on both sides after curtailment to make the panel width 400 mm.
  • Flame Spread shall be within 25 mm in case of material gets fire.
  • Material shall have good chemical resistance.
  • Safe working temperature for the FRP material shall be 120° C
  • All fixing accessories (clamps & clips) are of SS304 (minimum).

FRP Gratings Usage Areas :

  • Chemical Plants
  • Factory and industrial facilities
  • Food industries
  • Power Plants
  • Refineries

Pultrusion Operation
pultrusion-process
Pultrusion is a manufacturing method used to make strong, lightweight composite materials. In pultrusion, material is pulled through forming machinery using either a continuous-roller method (as opposed to extrusion, where the material is pushed through dies). In fiberglass pultrusion, fibers (the glass material) are pulled from spools through a device that coats them with a resin. They are then typically heat-treated and cut to length. Fiberglass produced this way can be made in a variety of shapes and cross-sections, such as C sections.
FEATURES OF FRP CABLE TRAYS
  • Fire retardant
  • Light Weight
  • Long Life
FRP Cable Trays
FRP Sections are manufactured from an advanced formulation of thermosetting polyester resin with Fiber glass reinforcement, with state-of-the-art infrastructure and electronically controlled Pultrusion plants.
Types of FRP Cable Trays

  • Perforated Cable Trays
  • Ladder type Cable Trays

FRP Perforated Cable Trays & Cover
frp perforate cable tray

DRAWING OF CABLE TRAYS
drawing cable tray

FRP PERFORATED CABLE TRAYS SIZE
  • WIDTH - 300MM,450MM,150MM
  • HEIGHT - 100MM,75MM,50MM
  • THICKNESS - 3MM
  • LENGTH - 3000MM
Size of perforate cable trays & Cover
1
50x30x30mm
2
50x50x50mm
3
75x50x50mm
4
100x50x50mm
5
150x50x50mm
6
200x50x50mm
7
300x50x50mm
8
450x50x50mm

FRP PERFORATE CABLE TRAY ACCESSORIES
  • HORIZONTAL BEND -90/45 DEGREE
  • VERTICAL INNER BEND- 45 DEGREE
  • VERTICAL OUTER BEND-45 DEGREE
  • CABLE TRAY CROSS
  • CABLE TRAY REDUCER
  • CABLE TRAY TEE
  • COUPLER PLATE & HARDWARE
access
FRP Ladder Types Cable Trays & Cover
frp ladder type cable tray

DRAWING OF CABLE TRAYS
ladder-drawing-cable-tray

  • RUNG-25X25MM
  • SIDE CHANNEL-75X30X30x4MM
  • LENGTH-3000M

 

SIZE OF LADDER CABLE TRAY & COVER

1

200x50x50mm ( Height-75MM,100MM)

2

300x50x50mm ( Height-75MM,100MM)

3

400x50x50mm ( Height-75MM,100MM)

4

450x50x50mm ( Height-75MM,100MM)

5

500x50x50mm ( Height-75MM,100MM)

6

550x75x75mm ( Height-75MM,100MM)

7

600x50x50mm ( Height-75MM,100MM)

8

750x50x50mm ( Height-75MM,100MM)

9

850x50x50mm ( Height-75MM,100MM)

10

950x50x50mm ( Height-75MM,100MM)



ACCESSORIES OF LADDER TYPE CABLE TRAYS
  • HORIZONTAL BEND -90/45 DEGREE
  • VERTICAL INNER BEND- 45 DEGREE
  • VERTICAL OUTER BEND-45 DEGREE
  • CABLE TRAY CROSS
  • CABLE TRAY REDUCER
  • CABLE TRAY TEE
  • COUPLER PLATE & HARDWARE

ladder-type-access

STRUCTURAL PROPERTIES OF FRP PROFILES

MECHANICAL PROPERTIES

Standard Followed

Units

Min. Value

Tensile Stress Lengthwise

ASTM D‐638

MPa

205

Tensile Stress Crosswise

ASTM D‐638

MPa

49

Tensile modulus lengthwise

ASTM D‐638

GPa

17000

Tensile modulus Crosswise

ASTM D‐638

GPa

5500

Compressive Stress Lengthwise

ASTM D‐695

MPa

205

Compressive Stress Crosswise

ASTM D‐695

MPa

102

Compressive modulus

Lengthwise

ASTM D‐695

 

GPa

170000

Compressive modulus Crosswise

ASTM D‐695

GPa

675

Flexural Stress Lengthwise

ASTM D‐790

MPa

205

Flexural Stress Crosswise

ASTM D‐790

MPa

69

Flexural Modulus Lengthwise

ASTM D‐790

GPa

12400

Flexural Modulus Crosswise

ASTM D‐790

GPa

5500

Izod Impact Lengthwise

ASTM D‐256

J/mm

1.33

Izod Impact Crosswise

ASTM D‐256

J/mm

0.21

 

 

 

 

PHYSICAL PROPERTIES

Standard Followed

Units

Min. Value

Barcol Hardness

ASTM D‐2583

 

NO

24 Hours Water Absorption

ASTM D‐570

% Max

0.45

Density

ASTM D‐792

gm/cc

1.7-1.95

Glass Content

ASTM D‐2584

%

60%

Limiting Oxygen Index

ASTM D‐2863

%

30%

 

 

 

 

ELECTRICAL PROPERTIES

Standard Followed

Units

Value

Arc Resistance Lengthwise

 

Seconds

45

Dielectric Strength Lengthwise

 

kV/mm

1.5

 

 

 

 

FLAMMABILITY PROPERTIES

Standard Followed

Units

Value

Flammability

ASTM D‐635

Seconds

‐‐‐‐

Vertical Burn Test

UL 94

‐‐‐‐

25mm

Glow wire test

ASTM D‐6194

‐‐‐‐

‐‐‐‐

Click here to SEND YOUR ENQUIRY